- Maximizing Battery Life and Lifespan
- How do I keep my Apple battery healthy?
- What battery percentage should I keep my iPhone at?
- Should you charge your iPhone at 100 percent?
- What ruins your battery health?
- At what percentage should I charge my phone?
- Is it OK to leave iPhone charging overnight?
- What drains iPhone battery?
- Is it OK to charge iPhone every night?
- Does leaving iPhone plugged in ruin battery?
- Is it better to charge iPhone overnight?
- Should I stop charging at 80?
- What is the 40 80 rule?
- Batteries – Maximizing Performance – Apple
- iPhone Battery and Performance – Apple Support
- 8 Ways to Maintain Your iPhone's Battery Health – MakeUseOf
- How to Save Battery Life on Your iPhone | PCMag
- 11 tips to save battery life on your iPhone | Tom's Guide
- How to save battery on iPhone? – best solutions 
- iOS 15 Battery Drain: 29+ Tips to Make Your … – MacRumors
- AVOID these mistakes to improve your iPhone battery life …
- Apple Watch battery tips that actually work – MyHealthyApple
Maximizing Battery Life and Lifespan
“Battery life” is the amount of time your device runs before it needs to be recharged. “Battery lifespan” is the amount of time your battery lasts until it needs to be replaced. Maximize both and you’ll get the most out of your Apple devices, no matter which ones you own.
Tips for iPhone, iPad, and iPod touch
Update to the latest software.
Always make sure your device is using the latest version of iOS.
- If you are using iOS 5 or later, see if you need an update. Go to Settings > General > Software Update.
- If an update is available, you can plug your device into a power source and update wirelessly or plug it into your computer and update with the latest version of iTunes.
Optimize your settings.
There are two simple ways you can preserve battery life — no matter how you use your device: adjust your screen brightness and use Wi‑Fi.
Dim the screen or turn on Auto-Brightness to extend battery life.
- To dim, open Control Center and drag the Brightness slider to the bottom.
- Auto-Brightness adjusts your screen to lighting conditions automatically. To activate it, go to Settings > Accessibility. Tap Display & Text Size, then turn on Auto-Brightness.
When you use your device to access data, a Wi‑Fi connection uses less power than a cellular network — so keep Wi‑Fi on at all times. To turn on Wi‑Fi, go to Settings > Wi‑Fi to access a Wi‑Fi network.
Enable Low Power Mode.
Introduced with iOS 9, Low Power Mode is an easy way to extend the battery life of your iPhone when it starts to get low. Your iPhone lets you know when your battery level goes down to 20%, and again at 10%, and lets you turn on Low Power Mode with one tap. Or you can enable it by going to Settings > Battery. Low Power Mode reduces display brightness, optimizes device performance, and minimizes system animations. Apps including Mail will not download content in the background, and features like AirDrop, iCloud sync, and Continuity will be disabled. You can still use key functions like making and receiving phone calls, email, and messages, accessing the Internet, and more. And when your phone charges up again, Low Power Mode automatically switches off.
View Battery Usage information
With iOS, you can easily manage your device’s battery life, because you can see the proportion of your battery used by each app (unless the device is charging). To view your usage, go to Settings > Battery.
Here are the messages you may see listed below the apps you’ve been using:
Background Activity. This indicates that the battery was used by the app while it was in the background — that is, while you were using another app.
- To improve battery life, you can turn off the feature that allows apps to refresh in the background. Go to Settings > General > Background App Refresh and select Wi-Fi, Wi-Fi & Cellular Data, or Off to turn off Background App Refresh entirely.
- If the Mail app lists Background Activity, you can choose to fetch data manually or increase the fetch interval. Go to Settings > Accounts & Passwords > Fetch New Data.
Location and Background Location. This indicates that the app is using location services.
- You can optimize your battery life by turning off Location Services for the app. Turn off in Settings > Privacy > Location Services.
- In Location Services, you can see each app listed with its permission setting. Apps that recently used location services have an indicator next to the on/off switch.
Home & Lock Screen. This indicates that the Home screen or Lock screen was displayed on your device. For example, the display was awakened by pressing the Home button or by a notification.
- If an app frequently wakes your display with notifications, you can turn off push notifications for the app in Settings > Notifications. Tap the app and set Allow Notifications to Off.
No Cell Coverage and Low Signal. This indicates either that you are in a poor cell coverage area and your iOS device is searching for a better signal or that you’ve used your device in low-signal conditions, which has affected your battery life.
- You can optimize your battery life by turning on Airplane mode. Open Control Center and tap the Airplane mode icon. Note that you cannot make or receive calls while in Airplane mode.
Plug in and power on your computer to charge your device.
Make sure your computer is plugged in and powered on when you’re using it to charge your iOS device via USB. If your device is connected to a computer that’s turned off or is in sleep or standby mode, your device’s battery may drain. Note that iPhone 3G and iPhone 3GS cannot be charged with a FireWire power adapter or FireWire-based car charger.
Tips for Apple Watch
Update to the latest software.
Always make sure your Apple Watch is using the latest version of watchOS.
- To see if you need an update, open the Apple Watch app on your iPhone and go to My Watch > General > Software Update.
- If an update is available, connect your iPhone to Wi-Fi, attach the charger to your Apple Watch (make sure it has at least 50% charge), and update wirelessly.
Adjust your settings.
There are a few ways you can preserve battery life on your Apple Watch:
- During running and walking workouts, turn on Power Saving Mode to disable the heart rate sensor. To do this, open the Apple Watch app on iPhone, go to My Watch > Workout, and turn on Power Saving Mode. Note that when the heart rate sensor is off, calorie burn calculations may not be as accurate.
- For longer workouts, you can choose to use a Bluetooth chest strap instead of the built-in heart rate sensor. To pair the Bluetooth chest strap with your watch, make sure the strap is in pairing mode, then open Settings on Apple Watch, select Bluetooth, and choose from the list of Health Devices.
- If you’re very active with your hands and your watch display turns on more than you think it should, you can prevent the display from turning on every time you raise your wrist. Open Settings on Apple Watch, select General, select Wake Screen, and turn Wake Screen on Wrist Raise off. When you want to turn on the display, just tap it or press the Digital Crown.
- Disabling Bluetooth on your iPhone increases the battery drain on your Apple Watch. For more power-efficient communication between the devices, keep Bluetooth enabled on iPhone.
Enable Low Power Mode.
Introduced with watchOS 9, Low Power Mode is an easy way to extend the battery life of your Apple Watch when needed, for example if you’re on a long flight or find yourself without your charger for the night. You can enable it by swiping up to Control Center and tapping on the battery percentage, or by going to Settings > Battery. Low Power Mode prolongs battery life by turning off always-on display and limiting background sensor readings and the cellular and Wi- Fi connections of your Apple Watch.
When not in range of your iPhone your Apple Watch will attempt to retrieve notifications approximately once an hour. Low Power Mode will turn off features such as: Background heart rate measurements, Heart Rate Notifications, Irregular Rhythm Notifications, and Blood oxygen measurements. When your Apple Watch charges to 80% Low Power Mode automatically switches off.
View Battery Usage information
To view your battery usage and charging history, open the Settings app on your Apple Watch and go to Battery.
Plug in and power on your computer to charge your Apple Watch.
If you want to charge from your computer, make sure it is plugged in and powered on when you’re using it to charge your Apple Watch via USB. If your Apple Watch is connected to a computer that’s turned off or is in sleep or standby mode, the Apple Watch battery may drain.
If your Apple Watch battery needs service, use Apple or an authorized service provider.
Tips for iPod shuffle, iPod nano, and iPod classic
Update to the latest software.
Always make sure your iPod is using the latest version of Apple software. Put your iPod in its dock or plug it into your computer, and iTunes will notify you of available updates.
Optimize your settings.
Hold and pause. Set the Hold switch when you’re not using your iPod. This will prevent iPod from accidentally waking up and using unnecessary power. If you’re not listening to your iPod, pause it, or turn it off by pressing the Play button for two seconds.
Equalizer (EQ). Adding EQ to playback increases use of your iPod processor, since EQ isn’t encoded in the song. Turn EQ off if you don’t use it. If, however, you’ve added EQ to tracks in iTunes, you’ll need to set EQ to “flat” in order to have the effect of “off,” because iPod keeps your iTunes settings intact.
Backlight. Setting the backlight to “always on” will significantly reduce your battery life. Use the backlight only when necessary.
Plug in and power on your computer to charge your iPod.
Make sure your computer is plugged in and powered on when you’re using it to charge your iPod via USB. If your iPod is connected to a computer that’s turned off or is in sleep or standby mode, the iPod battery may drain.
Tips for MacBook Air and MacBook Pro.
Update to the latest software.
Always make sure your MacBook is using the latest version of macOS. If you’re connected to the Internet, macOS automatically checks for software updates every week, but you still control when the updates are installed. To confirm that you’re using the latest software, go to the Apple menu and choose Software Update.
Optimize your settings.
Energy. The Energy Saver preference pane includes several settings that determine power levels for your MacBook. Your MacBook knows when it’s plugged in and runs accordingly. When using battery power, it dims the screen and uses other components sparingly. If you change this setting to maximize performance, your battery will drain more quickly.
Brightness. Dim the screen to the lowest comfortable level to achieve maximum battery life. For instance, when watching a video on an airplane, you may not need full brightness if the cabin lights are off.
Wi-Fi. Wi-Fi consumes power, even if you are not using it to connect to a network. You can turn it off in the Wi-Fi status menu in the menu bar or in Network preferences.
Applications and peripherals. Disconnect peripherals and quit applications not in use. Eject an SD card if you’re not currently accessing it.
Plug in and power on your MacBook to charge other devices.
Make sure your MacBook is plugged in and powered on when you’re using it to charge other devices via USB. Otherwise those devices may drain the battery in your MacBook faster than normal. If another device is connected to your MacBook when it’s turned off or in sleep or standby mode, the device’s battery may drain.
Tips for Extending Battery Lifespan
Automatic battery health management.
To reduce battery aging, built-in software and hardware systems are included to manage charging patterns and battery temperature.
- Optimized Battery Charging and Optimized Charge Limit adapt to your daily usage and preserve your battery lifespan over time. Optimized Battery Charging is available on all platforms as of iOS 13, watchOS 7, and macOS Big Sur. Based on your daily charging routine, it may automatically defer charging to 100% until shortly before you need to use the battery. Apple Watch Ultra can further reduce time spent at high states of charge by learning when to charge to an Optimized Charge Limit and when to allow for a full charge.
- Charging may pause temporarily while in extreme temperature conditions, and will resume once the battery’s temperature returns to its normal operating range. Starting in iOS 16, you may see a notification appear on the lock screen when charging has paused for this reason. Starting in iOS 16 and watchOS 9, paused charging information is also available in Settings > Battery.
Avoid extreme ambient temperatures.
Your device is designed to perform well in a wide range of ambient temperatures, with 62° to 72° F (16° to 22° C) as the ideal comfort zone. It’s especially important to avoid exposing your device to ambient temperatures higher than 95° F (35° C), which can permanently damage battery capacity. That is, your battery won’t power your device as long on a given charge. Charging the device in high ambient temperatures can damage it further. Software may limit charging above 80% when the recommended battery temperatures are exceeded. Even storing a battery in a hot environment can damage it irreversibly. When using your device in a very cold environment, you may notice a decrease in battery life, but this condition is temporary. Once the battery’s temperature returns to its normal operating range, its performance will return to normal as well.
iPhone, iPad, iPod, and Apple Watch Comfort Zone
iPhone, iPad, iPod, and Apple Watch work best at 32° to 95° F (0° to 35° C) ambient temperatures. Storage temperature: -4° to 113° F (-20° to 45° C).
MacBook Comfort Zone
MacBook works best at 50° to 95° F (10° to 35° C) ambient temperatures. Storage temperature: -4° to 113° F (-20° to 45° C).
Remove certain cases during charging.
Charging your device when it’s inside certain styles of cases may generate excess heat, which can affect battery capacity. If you notice that your device gets hot when you charge it, take it out of its case first.
Store it half-charged when you store it long term.
If you want to store your device long term, two key factors will affect the overall health of your battery: the environmental temperature and the percentage of charge on the battery when it’s powered down for storage. Therefore, we recommend the following:
- Do not fully charge or fully discharge your device’s battery — charge it to around 50%. If you store a device when its battery is fully discharged, the battery could fall into a deep discharge state, which renders it incapable of holding a charge. Conversely, if you store it fully charged for an extended period of time, the battery may lose some capacity, leading to shorter battery life.
- Power down the device to avoid additional battery use.
- Place your device in a cool, moisture-free environment that’s less than 90° F (32° C).
- If you plan to store your device for longer than six months, charge it to 50% every six months.
Depending on how long you store your device, it may be in a low-battery state when you remove it from long-term storage. After it’s removed from storage, it may require 20 minutes of charging with the original adapter before you can use it.
How do I keep my Apple battery healthy?
Store it half-charged when you store it long term.
- Do not fully charge or fully discharge your device’s battery ? charge it to around 50%. …
- Power down the device to avoid additional battery use.
- Place your device in a cool, moisture-free environment that’s less than 32° C.
What battery percentage should I keep my iPhone at?
Apple recommends, as do many others, that you try to keep an iPhone battery between 40 and 80 percent charged. Topping up to 100 percent isn’t optimal, although it won’t necessarily damage your battery, but letting it regularly run down to 0 percent can prematurely lead to a battery’s demise
Should you charge your iPhone at 100 percent?
Is it bad to charge my phone to 100 percent? For optimized battery life, your phone should never go below 20 percent or never above 80 percent. It may put your mind at ease when your smartphone’s battery reads 100 percent charge, but it’s actually not ideal for the battery
What ruins your battery health?
Charging cycles are what impact the lifespan of a battery the most. The constant cycle of charging and discharging slowly degrades the battery’s health. What makes it even worse is when your phone is frequently starting the cycle from 0%. It’s best to keep your phone charged between 20-80% as much as possible.
At what percentage should I charge my phone?
When should I charge my phone? The golden rule is to keep your battery topped up somewhere between 30% and 90% most of the time. Top it up when it drops below 50%, but unplug it before it hits 100%. For this reason, you might want to reconsider leaving it plugged in overnight.
Is it OK to leave iPhone charging overnight?
As you can see, leaving your iPhone to charge overnight is not a good idea. Not only does it reduce the lifespan of the battery, but it can also cause the battery to overheat. The battery might catch fire leading to bodily injuries. To avoid this, ensure to have a power bank and carry your charger.
What drains iPhone battery?
The two things that cause the most battery drain in your iPhone are its screen and cellular service. Obviously, you know when you’re actively using your phone, but a lot of the time, your iPhone is performing tasks in the background and even lighting up your screen without you noticing.
Is it OK to charge iPhone every night?
Answer: A: Hello~ Yes you should..it is better to do so. Your iPhone cannot over charge and automatic updates can occur overnight while charging and connected to WiFi so you are ready to go with a fully charged battery everyday.
Does leaving iPhone plugged in ruin battery?
But even with these protective measures in place, leaving your phone plugged in overnight can still slowly chip away at your battery health.
Is it better to charge iPhone overnight?
Well, the rule of the thumb is to avoid charging your iPhone overnight. Naturally, lithium-ion batteries are reactive. As such, they can easily overheat especially when left overnight to charge. This can cause them to catch fire, as was the case with the Samsung Galaxy Note 7.
Should I stop charging at 80?
Hamilton says that you should only be partially charging your phone to slow down the depletion of your batteries life cycle. She says the sweet spot to keep your battery charged is at 25-85 percent.
What is the 40 80 rule?
What Is The 40-80 Battery Rule? The 40-80 battery rule indicates that you should maintain the battery meter of your electronics between 40 percent and 80 percent. This rule discourages charging your battery fully to 100%, and you should not let it run dry to zero percent before you recharge it.
Batteries – Maximizing Performance – Apple
Batteries – Maximizing Performance Maximizing Battery Life and Lifespan “Battery life” is the amount of time your device runs before it needs to be recharged. “Battery lifespan” is the amount of time your battery lasts until it needs to be replaced. Maximize both and you’ll get the most out of your Apple devices, no matter which ones you own. Tips for iPhone, iPad, and iPod touch Update to the latest software. Always make sure your device is using the latest version of iOS. If you are using iOS 5 or later, see if you need an update. Go to Settings > General > Software Update. If an update is available, you can plug your device into a power source and update wirelessly or plug it into your computer and update with the latest version of iTunes. Learn more about updating iOS Optimize your settings. There are two simple ways you can preserve battery life — no matter how you use your device: adjust your screen brightness and use Wi‑Fi. Dim the screen or turn on Auto-Brightness to extend battery life. To dim, open Control Center and drag the Brightness slider to the bottom. Auto-Brightness adjusts your screen to lighting conditions automatically. To activate it, go to Settings > Accessibility. Tap Display & Text Size, then turn on Auto-Brightness. When you use your device to access data, a Wi‑Fi connection uses less power than a cellular network — so keep Wi‑Fi on at all times. To turn on Wi‑Fi, go to Settings > Wi‑Fi to access a Wi‑Fi network. Enable Low Power Mode. Introduced with iOS 9, Low Power Mode is an easy way to extend the battery life of your iPhone when it starts to get low. Your iPhone lets you know when your battery level goes down to 20%, and again at 10%, and lets you turn on Low Power Mode with one tap. Or you can enable it by going to Settings > Battery. Low Power Mode reduces display brightness, optimizes device performance, and minimizes system animations. Apps including Mail will not download content in the background, and features like AirDrop, iCloud sync, and Continuity will be disabled. You can still use key functions like making and receiving phone calls, email, and messages, accessing the Internet, and more. And when your phone charges up again, Low Power Mode automatically switches off. View Battery Usage information With iOS, you can easily manage your device’s battery life, because you can see the proportion of your battery used by each app (unless the device is charging). To view your usage, go to Settings > Battery. Here are the messages you may see listed below the apps you’ve been using: Background Activity. This indicates that the battery was used by the app while it was in the background — that is, while you were using another app. To improve battery life, you can turn off the feature that allows apps to refresh in the background. Go to Settings > General > Background App Refresh and select Wi-Fi, Wi-Fi & Cellular Data, or Off to turn off Background App Refresh entirely. If the Mail app lists Background Activity, you can choose to fetch data manually or increase the fetch interval. Go to Settings > Accounts & Passwords > Fetch New Data. Location and Background Location. This indicates that the app is using location services. You can optimize your battery life by turning off Location Services for the app. Turn off in Settings > Privacy > Location Services. In Location Services, you can see each app listed with its permission setting. Apps that recently used location services have an indicator next to the on/off switch. Home & Lock…
iPhone Battery and Performance – Apple Support
iPhone Battery and Performance Understand iPhone performance and its relation to your battery. Your iPhone is designed to deliver an experience that is simple and easy to use. This is only possible through a combination of advanced technologies and sophisticated engineering. One important technology area is battery and performance. Batteries are a complex technology, and a number of variables contribute to battery performance and related iPhone performance. All rechargeable batteries are consumables and have a limited lifespan—eventually their capacity and performance decline such that they need to be replaced. As batteries age, it can contribute to changes in iPhone performance. We created this information for those who would like to learn more. About lithium-ion batteries iPhone batteries use lithium-ion technology. Compared with older generations of battery technology, lithium-ion batteries charge faster, last longer, and have a higher power density for more battery life in a lighter package. Rechargeable lithium-ion technology currently provides the best technology for your device. Learn more about lithium-ion batteries. How to maximize battery performance “Battery life” is the amount of time a device runs before it needs to be recharged. “Battery lifespan” is the amount of time a battery lasts until it needs to be replaced. One factor affecting battery life and lifespan is the mix of things you do with your device. No matter how you use it, there are ways to help. A battery’s lifespan is related to its “chemical age,” which is more than just the passage of time. It includes different factors, such as the number of charge cycles and how it was cared for. Follow these tips to maximize battery performance and help extend battery lifespan. For example, keep iPhone half-charged when it’s stored for the long term. Also avoid charging or leaving iPhone in hot environments, including direct sun exposure, for extended periods of time. When batteries chemically age All rechargeable batteries are consumable components that become less effective as they chemically age. As lithium-ion batteries chemically age, the amount of charge they can hold diminishes, resulting in shorter amounts of time before a device needs to be recharged. This can be referred to as the battery’s maximum capacity—the measure of battery capacity relative to when it was new. In addition, a battery’s ability to deliver maximum instantaneous performance, or “peak power,” may decrease. In order for a phone to function properly, the electronics must be able to draw upon instantaneous power from the battery. One attribute that affects this instantaneous power delivery is the battery’s impedance. A battery with a high impedance may be unable to provide sufficient power to the system that needs it. A battery’s impedance can increase if a battery has a higher chemical age. A battery’s impedance will temporarily increase at a low state of charge and in a cold temperature environment. When coupled with a higher chemical age, the impedance increase will be more significant. These are characteristics of battery chemistry that are common to all lithium-ion batteries in the industry. When power is pulled from a battery with a higher level of impedance, the battery’s voltage will drop to a greater degree. Electronic components require a minimum voltage to properly operate. This includes the device’s internal storage, power circuits, and the battery itself. The power management system determines the capability of the battery to supply this power, and manages the loads in order to maintain operations. When the operations can no longer be supported with the full capabilities of the power management system, the system will perform a shutdown to preserve these electronic components. While this shutdown is intentional from the device perspective, it may be unexpected by the user. Preventing unexpected shutdowns With a low battery state of charge, a higher chemical age, or colder temperatures, users are more likely to experience unexpected shutdowns. In…
8 Ways to Maintain Your iPhone's Battery Health – MakeUseOf
8 Ways to Maintain Your iPhone’s Battery Health Apple’s iPhone is a powerful device but, like many electronics, it requires some upkeep to ensure proper functioning. Like a ship that can sail forever, as long as there are people willing to maintain it, your iPhone will keep working as long as you maintain the battery health. Here’s why maintaining your iPhone battery is key, and how to do it to get more years from your device. Why It’s Important to Maintain Your iPhone’s Battery Health While all iPhones will degrade over time, there are certain actions that can be taken to prolong their longevity. One of the most common parts of an iPhone to break first is the battery. If you neglect taking care of the battery, it may stop functioning altogether even when plugged in. There is no way to guarantee how long an iPhone’s battery will last, as there are many factors that impact its health. However, it helps to be aware of common battery issues and learn how to maintain the iPhone’s overall long-term health. If you want to use your iPhone for as long as possible, here are some ways to maintain your iPhone’s battery health for the years to come. 1. Avoid Maximizing Your Charge Cycles According to Apple, after 400 to 500 full charge cycles, iPhones hold significantly less charge compared to their original battery capacity. So, in general, the less you use your iPhone the longer the battery will last. What’s more, keeping the device at a full charge or completely drained can also reduce the battery health. For this reason, you should try to keep your iPhone between 40% and 80% battery as much as possible. 2. Don’t Leave Your iPhone Without Charge for Too Long The battery cells that make up lithium-ion batteries have a limited lifespan, meaning you should take care of them if you want to keep reaping the benefits of your iPhone. One of the biggest killers to a smartphone’s battery is letting it die completely, because when a battery cell gets to absolute zero charge, it may never work again. Luckily, iPhone batteries still keep some reserve charge even when they power off, to avoid this problem. But if your iPhone dies, you should remember to charge it again as soon as possible. To avoid this, take advantage of the iPhone’s Low Power mode when the battery is at 20% or lower to extend life until you can get to an outlet. 3. Don’t Leave Your iPhone Charged Overnight Many people charge their phones overnight because it is the most convenient option. However, overcharging an iPhone like this can result in a damaged battery and reduce the life of your phone. Overcharging damages your battery because it forces more current into already full cells than they are designed to hold. It also means your iPhone spends most of the night at 100% charge, which is bad for its health. Luckily, iPhones offer an optimized battery charging feature, which you can enable by going to Settings > Battery > Battery Health. If you take your phone off charge at the same time…
How to Save Battery Life on Your iPhone | PCMag
How to Save Battery Life on Your iPhone It’s tough to exist without a smartphone these days, and with so much of our life contained inside these tiny devices, we don’t want them running out of juice at an inopportune time.In our tests, the iPhone 12 Pro Max offered more than 15 hours of battery life, but what if you have an older model that may not last as long? Apple’s $29 battery-replacement program is long gone, but you can still pay $49 to $69(Opens in a new window) to swap in a new one, depending on which model iPhone you have. If you’d prefer to eke out a few more months without paying for a new battery (or iPhone), though, here are some things to try.Our Top-Rated iPhone Picks Best Practices to Live ByBefore we get into the short-term ways to boost your battery life, it’s important to know what you can do to help your battery withstand the test of time. We’ve debunked a few of the myths around phone batteries, but here’s what the Responsible Battery Coalition(Opens in a new window) has to say:Avoid temperature extremes, both high and low, when using or storing lithium-ion batteries.Minimize the amount of time a battery spends at either 100% or 0% charge, as both extremely high and low “states of charge” stress batteries.Avoid “fast-chargers,” that, while convenient, also degrade lithium-ion batteries more quickly than standard charging.There are settings that can be changed and features you can toggle off to save energy. Here is what you can do right now to boost your iPhone’s battery life, and hopefully make it through the day without having to plug in.Activate Low Power Mode One of your strongest weapons against battery drain is Low Power Mode(Opens in a new window). With it enabled, your phone only performs the most essential of tasks, so background activities like downloads and mail fetching are disabled.Low Power Mode will automatically kick in when the battery falls below 20%, but you can also activate it manually to keep your phone going for longer (though it will only work if your phone’s battery is below 80%). Head over to Settings > Battery > Low Power Mode and toggle it on. When activated, the battery icon in the top-right corner will turn yellow.Adjust Screen Brightness Smartphone displays are bigger and brighter these days, but those crisp screens keeping you awake at night are murder on your battery life. The good news is you can easily dim them.First, activate auto-brightness. Navigate to Settings > Accessibility > Display & Text Size > Auto-Brightness and toggle it on. Your phone will adjust its brightness based on your current lighting situation. If you have enough light to see, the screen will turn itself down to save battery.You can also manually adjust brightness levels in Settings > Display & Brightness, by using the the slider bar. A slider is also accessible via the Control Center; press lightly on the brightness icon and move the slider up or down.Turn Off Location Services Location services are helpful for apps like Google Maps or Yelp, but those GPS pings can wear down a battery quick. Turn off location services completely via Settings > Privacy > Location Services and your phone will stop feeding location data to these services.This, however, will make a number of useful apps stop working. Your weather app won’t know where you are for the latest forecast, and you won’t be able to ask Google for directions based on your current location. Apple allows you to customize how most apps use location data: Never, While Using the App, or Always. Select While Using the App for Google Maps, for example, and the app will only ping your location when you open it, not in the background, draining battery.Turn Off Background App Refresh When you close an iOS app, it will keep running for a bit until entering a suspended state. With Background App Refresh, however, those suspended apps can still check for updates and new content—a process that can drain battery life.You can disable Background App Refresh completely or just for certain…
11 tips to save battery life on your iPhone | Tom's Guide
11 tips to save battery life on your iPhone Home How-to Smartphones (Image credit: Shutterstock) Are you looking for ways to save battery life on your iPhone? Perhaps you’re using an older device with a battery that’s past its prime, but now isn’t the right time to upgrade for whatever reason. Or maybe you’re a heavy user of a brand new iPhone, looking to eek out an extra hour to survive that evening commute home. Whatever the reason, you’re certainly not alone, and it pays to have some iPhone battery saving tips up your sleeve to maximize your endurance.This article will cover tips which can improve iPhone battery life immediately, and others that will help extend the overall lifespan of it too, which in turn will help keep charge times longer over time. See, while iPhones are regularly regarded as some of the best phones out there, like any other battery powered device, their batteries will undoubtedly degrade over time. This is known as chemical aging, and leads gradually to shorter time between charges, which may explain an iPhone battery draining fast.With this inevitability in mind, it’s important to think long term about your phone’s battery, even when it’s new, and to use some of the iPhone’s features to ensure your battery’s lifespan (and subsequently its charge capacity) is extended further down the line. To help with that, it’s wise to follow some, if not all of the steps we’re suggesting here, but also to periodically check your iPhone battery’s overall health in the Battery menu of the Settings app to get an idea of its chemical age.If your iPhone is not charging, these tips might help you solve the problem.Without further ado, here’s how to save battery on iPhone.While we’ll help you get the most out of your iPhone with our tutorials, you may be ready for an upgrade. If that time is now, check out our best iPhones list for every budget.How to save battery life on your iPhoneEnable Optimised Battery ChargingUse Low Power ModeTurn on Auto BrightnessEnable Reduce MotionLimit your screen’s refresh rateTurn off Background App RefreshLimit Location ServicesDisable Wi-Fi, Bluetooth and AirDrop Update iOSAvoid extreme temperaturesStop closing appsRead on to see detailed instructions for each step.1. How to enable Optimised Battery Charging on iPhoneIt’s not good for your battery to spend its entire time at full charge. Therefore, to increase the longevity of your battery, make sure you enable Optimised Battery Charging. With this on, your iPhone learns your daily charging routine, it’ll wait at 80% before charging the remaining 20% just before you typically start using your phone — when you wake up, for instance. This way the battery spends less time at full, and you’ll experience longer periods between charges over time.1. Open Settings, then tap Battery. 2. Select Battery Health and toggle Optimised Battery Charging to on.(Image credit: Future)2. How to use Low Power Mode on iPhoneLow Power Mode is super handy for extending the life of your iPhone’s battery when you’ve overdone it a little. It does this by nerfing your iPhone in certain ways, disabling or restricting features including 5G, visual effects, refresh rate and screen brightness. It’ll buy you some precious time to get to an outlet, though.1. Open Settings, then tap Battery.2. Toggle Low Power Mode…
How to save battery on iPhone? – best solutions 
How to save battery on iPhone? If you are an iPhone user, you probably enjoy both the look and productivity of your device, which is equally good for business and pleasure. We know you want to use your iPhone as long as possible and you must be wondering how to save battery on iPhone. Depending on the iPhone generation and how you are treating your device, the average battery life after a single charge may vary widely. The tips below will help minimize iPhone battery drain daily while preserving the most of its operational capabilities. It contains tips on how to optimize and save battery on iPhone; most of them also apply to other iOS devices such as the iPad, iPad Mini, and iPod Touch. Why is my iPhone battery draining so fast Battery life depends on several factors that may affect its lifespan. Optimizing iPhone settings is key to minimizing battery drain. Here are the steps which will immediately help to extend the life of your iPhone battery. Adjust screen brightness or enable Auto-Brightness. The backlight used to illuminate the screen of your device screen consumes plenty of energy. You can minimize the power used by the backlight by navigating to Settings > Display & Brightness and dimming the screen. With iOS 13, you can use Dark Mode, which can also save your battery power. Go to Settings > Display & Brightness > select Dark Mode. If you’d rather not change the brightness of your screen and don’t want to use Dark Mode, you can turn on Auto-brightness. This will optimize battery consumption by the backlight, allowing the iPhone to adjust the screen brightness based on the current ambient lighting. To enable the Auto-brightness mode, go to Settings > Accessibility > Display & Text Size, scroll down, then find the Auto-Brightness setting and turn it on by tapping the button. Enable Optimized Battery Charging. Available with iOS 13 and later, Optimized Battery Charging learns from your daily behavior to reduce the time your iPhone spends fully charged. It helps the battery to keep 100% capacity for a longer time. Navigate to Settings > Battery > Battery Health > Optimized Battery Charging. Turn off location services or minimize their use. iPhone automatically uses a built-in GPS antenna in addition to 3G and Wi-Fi data to accurately locate the device. Many applications use iPhone location services which ultimately hurts battery life. To disable location services, go to Settings > Privacy > Location Services > OFF. If you do not wish to disable location services completely, turn them off for some apps by going to Settings > Privacy > Location Services. Turn off push notifications and fetch new data less frequently, better still manually. Apple Push Notification service notifies you about what happens to your emails, notes, contacts, and other cloud data on the iPhone. Fetch is another method of checking for new data when Push is disabled. Push is generally more power-hungry than Fetch. Therefore, turn off Push and set Fetch to bring data less frequently or manually (e.g. upon request). Go to Settings > Mail > Accounts > Fetch New Data. Tap Fetch New Data, then tap the Push switch to turn it off. Warning: if you disable Push, you will not receive notifications on the spot (e.g. as soon as you receive an email). If you set Fetch to bring data manually, you will not receive notifications unless you manually open the respective app. For instance, you will only get notifications about new email messages upon launching the Mail app. Force-quit apps. If you’re not using some apps, don’t forget to close them as they can drain battery life. To force-quit an app on your iPhone, swipe up from the gesture bar and hold. Find the app you want to quit and swipe up on it in the app switcher mode. If you’re using an older model: double press the Home button and swipe up on the app card to close it. Disable Bluetooth and Wi-Fi. Unless you are…
iOS 15 Battery Drain: 29+ Tips to Make Your … – MacRumors
iOS 15 Battery Drain: 29+ Tips to Make Your Battery Last LongerWith every new operating system update, there are complaints about battery life and rapid battery drain, and iOS 15 is no exception. Since iOS 15 was released, we’ve seen reports of issues with battery life, and an uptick in complaints with each new point release since then. iOS 15 battery life problems can be caused by issues that Apple needs to address in the software, or when excessively using GPS, system-intensive apps and games, and more. A battery life issue caused by a bug can’t be helped until Apple provides an update to address it, but there are steps you can take to maximize your battery life and cut down on hidden sources that might be causing excess drainage. 1. Limit When and How Often Apps Access Your Location It’s a good idea to check your location settings to limit apps accessing your location for privacy reasons, but it can also be beneficial to your battery life. Here’s how to get to your Location Services settings: Open up the Settings app. Choose Privacy. Tap Location Services. Review the list and edit settings by tapping on the name of each app in the list. You have four possible choices for location settings for each app, though not all four choices will always be available for every app depending on what it does. You can select the following: Never, Ask Next Time, While Using the App, and Always. Never will prevent an app from ever accessing your location, and unless there’s a specific need for an app to know where you are, such as a mapping app, setting location access to Never is the best choice.Ask Next Time will prompt an app to ask you with a popup the next time that it wants your location, so you can temporarily approve it. With this setting, location access is off until expressly allowed via the popup. While Using the App, as the name suggests, allows the app to detect your location only when the app is open and being actively used. If you close the app or switch over to another app, location access ends. Always allows an app to have access to your location at all times, regardless of whether it’s open or closed. This will result in the most battery drain and should be limited to only the apps that you need the most. A lot of apps will ask for location information that don’t really need it to function (for example, a banking app might want location access to show nearby ATMs, which is also available through entering a zip code), so clearing the cruft here will ensure no apps are accessing your location without express permission. You can also turn off Location Services all together, but most people probably aren’t going to want to do so because it can interfere with apps like Maps. 2. Limit Apps Using Bluetooth iOS 13 introduced a feature that lets you know when apps have requested Bluetooth access, and there are a surprising number of apps that want to use Bluetooth for things like location tracking with Bluetooth beacons or scanning for Chromecast devices. This is a good list to review to make sure you don’t have a sneaky app in the background connecting to Bluetooth sources without your permission as that can drain battery. It’s totally fine to allow Bluetooth access to apps that need it for Bluetooth-enabled accessories, but nixing access for retail stores is probably a good idea. Here’s how to access Bluetooth settings: Open the Settings app. Tap Privacy. Tap Bluetooth. From this list, toggle off any app that doesn’t…
AVOID these mistakes to improve your iPhone battery life …
AVOID these mistakes to improve your iPhone battery life iPhone users should not make these common mistakes while using or charging their iPhones to ensure the battery lasts for a much longer period. Here’s what Apple suggested. Whether you are using an old iPhone that struggles to last the whole day on a single charge or the latest flagship iPhone 13 with its fancy battery saving features, ultimately, your phone’s battery health and longevity lies in your hands. But keeping your phone battery healthy in the long run is much more complicated. Needless to say, the longer you can extend your phone’s “Battery lifespan”, the better it will be for you, saving time, effort and money.The idea is to make sure you don’t keep committing some common mistakes on a daily basis as these can slowly destroy the iPhone battery. Apple has asked its users to avoid making some mistakes and to follow these tips to keep their iPhone battery life healthy. Know what you should not do. iPhone users should AVOID these mistakesApple says that your iPhone should be kept away from extreme temperatures. You should avoid exposing your device to ambient temperatures higher than 35° C which can permanently damage battery capacity.Avoid keeping your iPhone with cases during battery charging. Certain cases may trap excess heat, which can affect battery capacity.DON’T ever charge your iPhone fully! The 100 percent battery capacity on your phone may seem relaxing, but Apple suggests not charging it fully. At the same time, you should make sure you do not discharge battery to zero either. This can bring the battery into a deep discharge state, which renders it incapable of holding a charge.iPhone battery TIPS that you should followAlways make sure your iPhone is using the latest version of iOS. If not, then Go to Settings > General and then find the Software Update to check the latest updates.Keep a check on your Settings to optimise the iPhone’s battery. Ensure to dim the screen light or turn on Auto-Brightness to extend battery life. You can activate it via Settings > General > Accessibility > Display Accommodations and then set Auto-Brightness. Just turn this on.Also, use Wi-Fi connection more often. Apple suggests that a Wi‑Fi connection uses less power than a cellular network. So, it’s better to keep your Wi-Fi on at all times.Low Power Mode is here to help you. It is an easy way to extend the battery life of your iPhone when it starts to get low on power. It reduces display brightness, optimises device performance and minimises system animations when your iPhone has low battery life.Keep a check on your battery usage pattern. You just need to access the Battery section from Settings, which will show you the proportion of your battery used by each app.
Apple Watch battery tips that actually work – MyHealthyApple
Apple Watch battery tips that actually work The Apple Watch is arguably the best smartwatch available on the market today. However, the Apple Watch battery life just isn’t the greatest as you will need to charge it every couple of days. Today, we’re taking a look at a few different ways for you to squeeze a bit more juice out of your Watch. These range from using Power Reserve to changing watch faces and more. Related articles Is your Apple Watch stuck on only showing the time in Power Reserve mode? Let’s fix it! Apple Watch screen stuck? Unresponsive scrolling? Try these quick fixes Apple Watch screen not responding to your taps and touch? Let’s fix it Apple Watch screen not waking up or turning on? How to fix it Make use of Battery Stats If you have noticed that your Apple Watch battery is draining quicker than normal, you’ll need to investigate. Similarly to the iPhone, the Watch app features a settings panel to view all of this information. Open the Watch app Select the My Watch tab Tap General Scroll down and select Usage Review stats under Time since last full charge, including usage AND standby as well as power reserve, if applicable From this same screen, you also see the amount of storage available on your watch and battery stats. Check your Apple Watch’s Battery Health You can leverage a battery health feature if your Apple Watch uses watchOS 7 and above. Sadly, this is unavailable for watchOS 6 and below and Apple Watch Series original through Series 2. On your Apple Watch, tap to open Settings Scroll down and choose Battery Review the graph and continue to scroll down for additional information for things like Last Charged to 100% Tap Battery Health Scroll down and check your current Maximum Capacity If your Apple Watch’s maximum capacity is less than 80 percent, consider getting Apple’s battery service (included at no additional charge with AppleCare+ and for $79 if outside of AppleCare+) Scroll down and toggle on Optimized Battery Charging This setting reduces the rate of battery decay by learning your charging routines and maximizing when it charges past 80% For optimizing to work, you need to also toggle on the following settings: Privacy > Location Services > Location Services Privacy > Location Services > System Services > System Customization Privacy > Location Services > System Services > Significant Locations > Significant Locations Turn off Background App Refresh Just like your iPhone, apps can refresh in the background on your watch. Try turning this feature entirely off or keep on only those apps that you believe are necessary for you to keep refreshing. Turn on Low Power mode With watchOS 9 and above, there’s an awesome power savings mode for Apple Watch called low power mode! Low Power Mode extends the watch’s battery life when you don’t have time to charge it or don’t have a charger handy. Low Power Mode turns off the always-on display and limits background sensor readings and your Apple Watch’s cellular and Wi-Fi connections. It turns off these features: Background heart rate measurements, Heart Rate Notifications, Irregular Rhythm Notifications, and Blood oxygen measurements. Additionally, when not in range of your iPhone, your Apple Watch tries…